Belly Inspection Panels
"raw castings" $5.23
"ready to be installed" $9.15
These are the Belly Inspection Panels for the Vario BK 117. These panels are located under the fuselage between the skids. The panels are non functional.
Each Belly Inspection Panels set includes each of the parts shown in the image below. The set is offered as "raw castings" and "ready to be installed".
The "raw castings" of the Belly Inspection Panels will need tobe removed from the "raw casting". The whole set will require washing and it will contain some flashing which will need to be cleaned off. Each casting can be applied to the fuselage with CA or epoxy after the surface of both the model and the back of the casting have been lightly sanded.
The “ready to be installed” version will be cleaned, sanded, and will have two coats of primer paint added.
NOTE: The fuselage has to have a hot air exhaust cut into it when building the gasser or nitro versions of this model. When the hole is cut you may loose part of these castings.
"raw casting" $5.23
"ready to be installed" $9.15
For questions or other information please contact us.
